Advertisement
Quick Links
Advertisement
Related Manuals for Top RC Model Focke-Wulf Fw190A-8
Summary of Contents for Top RC Model Focke-Wulf Fw190A-8
- Page 1 TopRCModel-USA.com...
- Page 2 TopRCModel-USA.com...
- Page 3 TopRCModel-USA.com...
- Page 4 3. Apply instand type AB glue to the holes in the aileron Accessory list for the installation of aileron and flap. and hinges. Epoxy the aileron to the wing. 4. Epoxy the aileron to the wing, Keep some space 1. Apply instand type AB glue to the slots in the flap and between the trailing edge and the aileron to make sure it pinned hinges.
- Page 5 9. Connect the fiber horns in the aileron to the servo arms with the linkage and lock each side with screws 6. Assemble the servos to the servo trays. and nut. 10. Connect the fiber horns in the flap to the servo arms 7.
- Page 6 11. Apply instand type AB glue to the holes in the elevator 14. Connect the fiber horns to the servo arms with the and round hinges, assemble the elevator to the stab. linkage and lock each side with screws and nut. 12.
- Page 7 16.Picture of the rudder install ready, make sure it can 19. Connect the arm of the tail landing gear with steel rotate smoothly. wire. 20. Drill a small hole to appropriate possition in the fuselage,connect the rudder to the servo in the fuselage 17.
- Page 8 24. Assemble the wheel cover to the oleo struts with Accessory list for the installation of main retracts screws. Accessory list for the installation of fuel tank and air 22. Install the main retracts to the wing with screws. tank. 25.
- Page 9 26. Assemble the air tubes to the switch valve. 28. Assemble the drop tanks to the fuselage. 27. Assemble the air tube to the air tank. 29. Assemble the engine to the engine mount. Accessory list for the installation of drop tank and engine.
- Page 10 31.Assemble the cowling to the fuselage, fix the propeller 33. Fixing the stab with screws from bottom of the and spinner to the engine. stab. Accessory list for the installation of fixing the wing and stab. 34. Assemble the canopy to the fuselage. Fixing the main wing with plastic screws from the fuselage.
- Page 11 35. Phones when the model assembled completely. 36. Phones when the model assembled completely. 第 11 页...
- Page 12 37.Adjust the travel of each control surface to the values 38.Adjust the travel of each control surface to the values in the diagrams. These values fit general flight in the diagrams. These values fit general flight capabilities.Readjust according to your needs and flight capabilities.Readjust according to your needs and flight level.
- Page 13 TopRCModel-USA.com...
Need help?
Do you have a question about the Focke-Wulf Fw190A-8 and is the answer not in the manual?
Questions and answers