Safety Symbols; General Description - Big Joe V Series Operator's Manual

WARNING and CAUTIONS are both signal words intended to alert the viewer to
the existence and relative degree of a hazard. They are both preceded by a safety
alert symbol consisting of an exclamation mark enclosed by a triangle.
A Warning indicates a hazard which could result in injury or death if proper pre-
cautions are not taken.
A Caution indicates a reminder of routine safety practices.
A prohibition slash (circle with diagonal slash through it) indicates a procedure or
action that should not be performed under any circumstances, as both personal
injury and/or damage to equipment will result.
The V15 truck lifts and transports pay-
loads up to 2800 pounds on adjust-
able forks. The V18 truck lifts and
transports payloads
pounds on adjustable forks.
The three wheel counterbalanced lift
truck has the character of a small
turning radius.
The forward and reverse motion is
controlled by a control lever on the left
side of the steering wheel. Stopping is
controlled by the brake pedal. Control
levers to the right of the operator con-
trol the Lift, Lower, and Tilt. Optional
levers are available to control side
motion of the forks and additional
attachments. The battery powered lift
truck is quiet and without exhaust
fumes.
Two front wheel mounted reversible
motors propel the lift truck in forward
or reverse direction throughout the
available speed range. The V series

SAFETY SYMBOLS

GENERAL DESCRIPTION

up to 3500
lift truck can be driven with forks
raised or lowered; however, the speed
is restricted when the forks are raised
above a preset limit.
The model number will be found on
the name plate along with the serial
number, lifting capacity, and load cen-
ter.
MODEL NO.
MAX CAP LB/ KG
ALT CAP LB/ KG
TRUCK WT LESS BATTERY LB/
TRUCK WT WITH BATTERY LB/
TRUCK BATTERY
TYPE TYPE
COMPLIES WITH THE APPLICABLE REQUIRE-
MENTS OF ANSI B56.1 AND OSHA STANDARDS
U.S. PATENT NO. 4,444,284
AUSTRALIAN PATENT NO. 537,987
BIG JOE LLC
WISCONSIN DELLS, WISCONSIN 53965
R6209
2
SERIAL NO.
LOAD CTR IN/ MM LIFT HGT IN/
LOAD CTR IN/ MM LIFT HGT IN/
KG BATTERY MIN WT LB/
KG BATTERY MAX WT LB/
CERTIFIED VOLTAGE
Name Plate
MM
MM
KG
KG