Changing The Moving Knife; Adjusting The Operating Speed Of Template When The Knife Operates - JUKI PS-800-8045 Instruction Manual

6-2-5. Changing the moving knife

Loosen two screws (rotary moving knife parts catalog number 53) on the moving knife. Detach the moving
knife and change it with a new one. Then, tighten the aforementioned two screws. When you attach a moving
knife, take care to attach it so that its bottom portion comes in contact with the moving knife rod without fail.

6-2-6. Adjusting the operating speed of template when the knife operates

❶
❺
❸
Start the machine and proceed to the main inter-
face. Then, click "Menu" ❶ . Click "Param File" ❷ ,
"Speed param" ❸ , and click the "Next" ❹ . Then,
adjust the "Head 2 speed (mm/s)" parameter value
as shown in ❺ . When you want to adjust the relat-
ed parameter(s), contact the manufacturer or the
professional worker who is an expert on the related
technology (The Head 2 speed has been factory-set
to 40 mm/s at the time of shipment).
– 63 –
❷
❹