JUKI PS-800-8045 Instruction Manual page 47

Error code
E242 No job IO
E243 Input waiting IO
E244 Delay is executed
E245 File name is too long
E246 Lift the presser foot in advance
E247 Frame is not pressed
E248 Auxiliary pressure frame is not pressed
E249 Pressure frame and auxiliary pressure
frame are not pressed
E250 Punched bottom material has run out
Error description
① Work enable input IO signal is abnormal.
② Shut down the "Work enable input IO" function. Set the
parameter value to 0 (zero).
Waiting for the input IO signal in the graphics file.
Delay command is executed with the graphics file.
It is necessary to shorten the file name.
It is necessary to lift the presser foot by clicking the "Press-
er foot" button.
It is necessary to press the frame in advance.
It is necessary to firstly press the auxiliary pressure frame.
It is necessary to push down all of the back pressure
blocks.
It is necessary to replace the material to be punched with a
new one.
– 44 –
Solution