JUKI PS-800-8045 Instruction Manual page 42

Classifi-
cation of No. Parameter name
parameters
Other P78 Work ending position
settings
P395 Template recognition meth-
od
P81 Interface style
P681 Motion mode is started
before operation
P755 Jump mode during opera-
tion
P241 Connection to the extend-
ed screen
P79 Reverse feed after main
shaft needle stops
P242 Voice prompt
P21 Enabling the memory func-
tion during power failure
P194 The file is enabled upon
separation of the electronic
label
Standard
Range
value
Return to 0 Return to
(zero) / sewing 0 (zero)
starting position
/ default
Barcode / elec- Electronic
tronic tag tag
Classic / simple Classic
XY simul- XY simul-
taneous / X taneous
precedence / Y
precedence
X precedence / X prece-
Y precedence / dence
XY simultane-
ous
Yes/No No
0 to 160 0
High / medium / OFF
low / OFF
Enable / disable Enable
Enable / disable Disable
– 39 –
Meaning of parameter and comment
Return to 0 (zero): All of x / y axes
coordinates return to 0 (zero); sewing
machine terminates sewing; reset point
Right side: Rightmost position within
the machining range
Sewing starting position: First sewing
point of the machining file
Default: The sewing machine stops
after the completion of machining
By serial number of file: Barcode identi-
fication mode
By file name: Electronic tag identifica-
tion mode
Classic: Button style of the virtual body
Simple: Flat button style
Jump travel mode
In the case of "Use", information on the
operation file can be displayed on the
external add-on display
"High", "medium" and "low" respective-
ly refer to the magnitude of sound
After re-energization of the sewing
machine, the sewing sequence carried
out before power failure is resumed to
continue sewing from that interrupted
sequence.