JUKI PS-800-8045 Instruction Manual page 54

❻ ❻
250 mm
30 mm
❻ ❻
4) Take out a seal from barcode seals ❻ provided.
One hundred barcode seals (with serial
numbers from 001 to 100) are provided.
5) Stick the barcode seal to the cassette at the posi-
tion that is 250 mm left from the center of cassette
(setup guide) and 30 mm below the upper side of
cassette.
The aforementioned sticking position is
recommended. It is acceptable to stick
the barcode seal at any position that will
not interfere with the recognition of the
barcode seal by the barcode reader.
– 51 –