Chapter 5 Appendices; Error Message And Troubleshooting; Hazardous Substance Table - Garmin CS 1522 Owner's Manual

5.1

Error Message and Troubleshooting

If you encounter an error, refer to the table below for possible solutions.
Error Message
Software Update Required
Unit Voltage Alarm
Lost Remote GPS Connection
Satellite reception was lost.
Memory card is write protected.
Database Error
Unsupported Transducer
Connected
Sonar module lost: (device)
5.2

Hazardous Substance Table

部件名称
印刷电路板组件
金属零件
电缆 电缆组件 连接器
本表格依据 SJ/T11364 的规定编制。
○：表示该有害物质在该部件所有均质材料中的含量均在 GB/T26572 规定的限量要求以下。
×：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572 规定的限量要求。
5.1 Error Message and Troubleshooting
CHAPTER 5 APPENDICES
Update the software.
The suggested input voltage is 10–36 VDC. Make
sure there is no significant voltage drop along the
power cable when the unit is in operation.
Check the connections and the cables connecting
external GPS antenna.
Make sure the GPS antenna, whether internal or
external, has a clear view of the sky.
Make sure the Lock switch is slid up to the unlock
position.
The device is unable to access the internal memory.
Please contact Garmin Support.
Check the connections to the transducer, and make
sure a compatible transducer is connected and that
settings are configured accordingly.
If problems persist, contact Garmin Support.
Check the power and network connections on the
external sonar module and the sonar display.
产品中有害物质的名称及含量
铅 汞
× ○
× ○
× ○
Solution
有害物质
镉 六价铬
○ ○
○ ○
○ ○
多溴联苯 多溴二苯醚
○ ○
○ ○
○ ○
10
63