Table of Contents
Advertisement
2.5.4
Marking a Waypoint
• To mark your boat position as a waypoint, press [MARK] without invoking the cursor.
• To mark previous positions and depths, move the cursor to a previous position, and
either press [MARK] or press [SELECT] > New Waypoint.
• Hold [MARK] to open the Waypoints list:
• Use the control pad to highlight a waypoint, and press [SELECT] or select Review to:
move, navigate to, edit, change the symbol of, delete, or send an SOS distress call at
the waypoint.
• Select Sort/Filter to sort the list by name, symbol, distance, or filter the list by
symbol.
• Select Search to search for a waypoint by name.
• Select New Waypoint to add a new waypoint by entering the coordinates, selecting
on the chart, using the current position, or entering the range and bearing.
• Select Navigate To to navigate to the highlighted waypoint either in a straight line or
by marking a route on the chart.
2.5.5
Capturing a Screenshot
From any screen, hold [SELECT] for 3 seconds, a screenshot (in PNG format) will be
saved to your inserted SD card (see 1.8).
2.5.6
Acknowledging and Silencing an Alarm
• When an alarm sounds, you can acknowledge and silence the alarm by pressing
[ALARM ACK].
• Hold [ALARM ACK] to open the Alarms menu (see 3.4).
38
Waypoints
Symbol
Name
Distance
0001
0�78
0002
0.62
0003
1.20
0004
3.28
0005
0.97
0.83
0006
0007
7.94
0008
8.06
0009
4.11
0010
0.35
Available
4988/5000
Bearing (Boat)
Review
Sort/Filter
324
m
G
i
Search
089
m
G
i
New Waypoint
125
m
G
i
Navigate To
249
m
G
i
206
m
G
i
041
m
G
i
102
m
G
i
008
m
G
i
338
m
G
i
016
m
G
i
Sorted by Distance
<<
CHAPTER 2 GETTING STARTED
120
>
150
>
Back
Advertisement
Table of Contents
