3.4
Alarms
Press [MENU] > Alarms to set up multiple alarms that will sound when the set conditions
are met.
3.4.1
Setting a Shallow Water Alarm
The shallow water alarm will sound when the water is shallower than the set depth.
Select Shallow Water to toggle the alarm on/off.
With Shallow Water toggled on, select Change Depth and use the main knob and the
control pad to enter a depth.
3.4.2
Setting a Deep Water Alarm
The deep water alarm will sound when the water is deeper than the set depth.
Select Deep Water to toggle the alarm on/off.
With Deep Water Alarm toggled on, select Change Depth and use the main knob and the
control pad to enter a depth.
3.4.3
Setting Water Temperature Alarms
The water temperature alarm will sound when the transducer reports a temperature that
is colder than the lower limit or hotter than the upper limit.
Select Water Temperature to toggle the alarm on/off.
With Water Temperature toggled on:
• Select Lower Limit and use the main knob and the control pad to enter a temperature.
• Select Upper Limit and use the main knob and the control pad to enter a temperature.
3.4.4
Setting Contour Alarms
The contour alarm will sound when a transducer detects a suspended target within the
specified depths.
Select Contour to toggle the alarm on/off.
With Contour toggled on:
• Select Shallow and use the main knob and the control pad to enter the upper limit.
• Select Deep and use the main knob and the control pad to enter the lower limit.
48
Menu
Alarms
Shallow Water
Sonar Setup
Clutter
Alarms
Deep Water
Navigation Info
Appearance
Water Temperature
Settings
G
f
t
System
Preferences
Contour
Communications
My Vessel
Change Depth
Change Depth
Lower Limit
Upper Limit
Shallow
Deep
CHAPTER 3 MENU AND SETTINGS
12.0
f
t
100.0
f
t
50.0
F
Medium
20.0
f
t
100.0
f
t