Philips M1191B Instructions For Use Manual page 3

Product Overview
Philips A-Series and B-Series reusable SpO
different styles and can be used to monitor a broad range of patient types
as indicated in the Sensor Applications table below. Refer to
Specifications later in this IFU for sensor accuracy.
Intended Use
These SpO sensors are for multi-patient use, when continuous non-
2
invasive arterial oxygen saturation and pulse rate monitoring are required.
Instrument Compatibility
All A-Series sensors (model numbers ending with A) are for use with any
Philips/Agilent/HP instrument that lists those sensors as an accessory. The
B-Series sensors (model numbers ending with B or BL) are for use with
any Philips/Agilent/HP instrument that lists them, or the obsoleted
M1191A and M1191AL sensors, as compatible accessories; i.e. the
M1191B sensor replaces the obsoleted M1191A; the M1191BL sensor
replaces the obsoleted M1191AL.
Sensor
Model Number
M1191B
1
M1191BL
M1192A
M1193A
M1194A
M1195A
1
M1191BL sensors have a Longer 3m (versus standard 2m) attached cable.
2
Preferred application sites for M1193A and M1195A sensors.
Sensor Applications
Sensor
Style
Finger
Glove Style
Glove Style
Glove Style
Wrap Style
Ear-Clip Style
Glove Style
sensors are available in three
2
Adult Pediatric
Ear Finger
1
Infant
2
Ear Toe
Finger
Neonate
2
Foot
Hand