Attaching The Pedestal To The Housing - Pepperl+Fuchs VisuNet GXP Series Manual

VisuNet GXP
Mechanical Installation
3.3.4

Attaching the Pedestal to the Housing

Warning!
Risk of injury
Lifting the GXP housing on your own may cause injury.
Do not attempt to lift the device on your own. Use a crane or have another person help you.
Mounting the Pedestal
1.
Rest the pedestal on the box that the GXP housing was shipped in. Position the pedestal and
box behind the housing.
2.
Slide the cable ends from the top of the pedestal through the openings in the bottom of the
housing.
3.
Align the mounting holes on the top of the pedestal with the mounting holes on the back of the
housing.
24
Warning!
Damage to cables
The cables may become damaged if they are pinched between the pedestal
and the housing.
Ensure that the cables do not get caught between the pedestal and housing
during the mounting process.