Pepperl+Fuchs VisuNet GXP Series Manual page 18

VisuNet GXP
Mechanical Installation
Warning!
Risk of injury
Lifting the GXP housing on your own may cause injury.
Do not attempt to lift the device on your own. Use a crane or have another person help you.
Warning!
Danger resulting from scratched display unit screen
Scratches on a display unit front screen weaken the glass structure and may result in broken
glass. Explosion protection is no longer ensured if a display unit with a scratched screen is
used.
NEVER use a display unit with a scratched front screen in a hazardous area. If the surface is
damaged in any way, return the display unit to Pepperl+Fuchs at once and replace it with a new
one.
Preparing the Housing
1.
Remove the box and leave the protective foam blocks on the housing. Save the uncollapsed
box for further mounting steps.
2.
Wrap strong adhesive tape around the foam blocks to hold them onto the housing and protect
the components during mounting.
3.
Place the housing face down on a flat surface.
18