Overview Of Fitting Locations - Skoda Octavia 1997 Workshop Manual

24
Only install clean parts: Remove spare parts from
♦
their wrapping immediately before fitting. Do not use
any parts which have been stored unwrapped (e.g. in
tool boxes etc.).
When the system is open: avoid working with com-
♦
pressed air. Avoid moving the vehicle.
Disconnected plug connections: Protect from dirt and
♦
moisture. Plug together only if dry.

Overview of fitting locations

Note
Components marked with an * are tested by self-diagnosis µ Chap. 01-1.
♦
Components marked with ** are tested by final control diagnosis µ Chapter 01-1.
♦
1 - Activated charcoal filter sys-
tem solenoid valve 1 -N80-*/**
K resistance: 22...30 Ω
2 - Return-flow line
K secure with spring strap
clamps
K to fuel delivery unit in fuel
tank
3 - Feed line
K secure with spring strap
clamps
K from fuel filter
4 - Camshaft position sensor
-G163-*
K for engines with engine code
AVU
K under top toothed belt guard
K inspect µ Chapter 28-1
5 - Variable intake manifold
changeover valve -N156- */**
K inspect µ Chapter 24-3
6 - Top part of intake manifold
K disassembling and assem-
bling µ 24-1 page 8
7 - Bottom part of intake mani-
fold
8 - Connector, 81 pin
K only insert or remove plug
when the ignition is switched
off
K unlock before removing
9 - Engine control unit*
K Fitting location: in plenum chamber
K replacing µ Chapter 24-6
10 - Connector, 40 pin
K only insert or remove plug when the ignition is switched off
K unlock before removing
11 - Throttle valve control unit -J338-*
K inspect µ Chapter 24-5
K 6-pin connector
24-1 2
page
Octavia 1997 1.6 l/75 kW Engine, Fuel Injection and Ignition System
30
Fuel Injection System
C A
B D
Edition 10.04
S00.5135.52.20