Enabling/Disabling The Button Lock - Silvercrest SWED 100 B1 User Manual And Service Information

SilverCrest SWED 100 B1
have chosen the "BUZ" alarm time setting, however, you will be woken
by the buzzer.
Please note that the alarm sound (radio or buzzer) is only
output via the headphones if headphones are connected to the
device.
 Briefly press the "POWER" button (8) to switch off the alarm tone or
press the "SNOOZE" button (5) to postpone the alarm for about 5
minutes The "ALARM" symbol (27) flashes. If you have previously
chosen the buzzer as the alarm tone, you can switch on the radio during
the snooze period. The alarm sounds again after the snooze period of 5
minutes. If you briefly press the "BAND" button (11) during these 5
minutes, the "SNOOZE" function is switched off, but the alarm function
remains activated.
 To deactivate the alarm function, press the "ALARM" button (12) again.
The "ALARM" symbol (27) is no longer indicated.

Enabling/disabling the button lock

Press the "LOCK" button (9) for approximately one second to enable the
button lock of the world receiver. The "LOCK" symbol (26) now flashes on
26 - English
Even if the alarm function is activated, you can still use
the device as usual. Please note:

Alarm with radio:
The alarm function always automatically uses the last
frequency, frequency band and volume set.

Alarm with buzzer:
The alarm function always automatically uses a
preset volume. This volume cannot be changed.