Inserting The Batteries - Silvercrest SWED 100 B1 User Manual And Service Information

SilverCrest SWED 100 B1

Inserting the batteries

Unplug the power adapter cable if there is one connected to the product.
Next slide the battery compartment cover (20) on the back panel of the
device in the direction of the arrow and remove it. Insert the batteries with
the correct polarity (+ and -), as shown in the following figure. The correct
polarity is labelled on the batteries and inside the battery compartment.
When installing the batteries, make sure the fabric strip is placed under the
batteries. This will let you remove them easily the next time you want to
exchange them. Re-insert the cover of the battery compartment (20) and
slide it in the opposite direction of the arrow until it locks in place.
English - 17