Enabling/Disabling The Button Lock - Silvercrest SWDR 500 A1 Operating Instructions And Safety Instructions

pressed for approx. one second. The set snooze time is shown on
the display (6). Press the "VOL-" (12) or "VOL+" (4) buttons to
change the snooze time. You can keep the buttons pressed to
accelerate the digits count. Press the "SNOOZE/BASS" button (2)
briefly to apply the setting.
 To disable the alarm, press the "M-/AL1" button (14) as many times as
necessary until no alarm icon (33, 34) is shown on the display (6).
Even when the alarm function is enabled, you can use the device as
usual. Please note:

Waking up with the radio:
The alarm always powers on with the last tuned-in frequency
and frequency band.

Waking up with the buzzer:
The alarm starts very low and gets louder until the set volume is
reached.

Enabling/disabling the button lock

Press and hold the "LOCK" button (3) for approx. one second to activate the
button lock. The "LOCK" icon (35) flashes on the display (6).
In order to operate the device, you first have to disable the button lock. To do
this, press and hold the "LOCK" button (3) again for approx. one second. The
"LOCK" icon (35) no longer flashes on the display (6).
Please note that the alarm sound cannot be stopped or delayed while the
button lock is enabled.
SilverCrest SWDR 500 A1
English - 35