Activate / Deactivate The Button Lock - Silvercrest SWED 500 A1 User Manual And Service Information

SilverCrest SWED 500 A1
preference. To do this, hold down the 'SNOOZE' button for about
one second when the radio is switched off. The current snooze
duration setting will be displayed on the screen (5). You can use
the 'UP' (13) or 'DOWN' buttons to change the snooze duration.
You can also hold down the buttons to move more quickly through
the numbers. Briefly press the 'SNOOZE' button (4) to accept the
setting.
 To deactivate the alarm, keep pressing the 'VOL-/AL1' button (2) until the
alarm icon (30, 31) is no longer displayed on the screen.
You can still use the device as normal when the alarm function is
activated. Please note:

Radio alarm:
The automatic alarm will turn the radio on at the same
frequency that it was last tuned to and in the same frequency
band.

Buzzer alarm:
The automatic alarm will always be at a pre-set volume. This
volume cannot be changed.

Activate / deactivate the button lock

Press the 'LOCK' button (11) for about a second in order to activate the button
lock on the
will now flash on the screen.
When the button lock is activated, you can still use the following functions:

Stop the alarm

Activate the 'SNOOZE' function on the alarm

End the 'SNOOZE' function by pressing the 'BAND' button

Activate the light-up screen
34 - English
multi-band radio. The 'LOCK' icon (27)