Electrolux Combi TOUCH Series User Manual page 50

Touch to test. Hold down to exit.
Food safety
riduzione figura in scala
del 20,5 %
This setting allows to enable / disable (
parameters:
SETTINGS
Food safety
Enable Food Safety Control (FSC)
Show F value during cooking
Ask for FSC set on start
Enable HACCP
FSC Safety Control (FSC)
The FSC feature guarantee the microbiological safe condition of
the food. If the FSC function is enabled it will be possible to:
• Enable/disable the visualisation of the "F" factor;
• Enable/disable asking for FSC set on start.
HACCP
• The HACCP feature allows the storage of all the set values
identifying a cooking process, and their variation, the cavity
temperature and, when used, the food core temperature at
specific intervals.
Autostart
This setting allows to enable / disable (
all modes.
SETTINGS
Autostart
Start cooking by closing the door
Manual
This setting allows to enable / disable (
cooking mode and its options:
50
/ ) the following
General
• Show real and set values. The activation allows to display the
• Always show food probe temperature. It allows to display the
• Cooking preheating. It allows the oven to perform the
• Advanced preheating. This activation allows to set a temper-
• Delayed start preheating. This activation allows the oven
• Multi-phase cooking. It allows the oven to perform Multi-phase
/ ) the Autostart in
Timer/Temperature dialogs
• Short cooking. The activation enables the short cooking
• Eco-delta cooking. The activation enables the Eco delta
• Minimum cavity-probe temperature difference. Touch to set
/ ) the Manual
del 20,5 %
SETTINGS
Manual
Enable Manual Cooking cycle
General
Timer/Temperature dialogs
Utilities
Hold
NOTE!
If a mode is disabled, it is not visible in the upper
drawer.
cycle with more detailed information: humidity, temperature
and time are shown as current and set values.
probe temperature values.
preheating/precooling phase.
ature to be reached in preheating/precooling phase. Touch
the temperature row and set the required value.
preparing the cavity for the delayed cooking cycle.
cooking cycle.
SETTINGS
Manual
Enable Manual cooking
General
Show real and set values
Always show food
probe temperature
Cooking preheating
Advanced preheating
Delayed start preheating
Multiphase cooking
feature showing up.
cooking feature showing up.
the minimum value on the appearing touchpad (e.g. 5℃).
SETTINGS
Manual
Enable Manual cooking
General
Timer / Temperature
Short cooking
Eco-delta cooking
Minimum cavity vs probe
temperature difference
Utilities
Hold
5C°