Touch Screen Commands / Info And Display Messages - Electrolux Combi TOUCH Series User Manual

Settings mode
"Settings mode " allows to customize the oven func-
tions and options for a better use.
< SCROLLING AREA Options>
Help
?
This function provides QR codes in order to display the user
manual on your device (smartphone, tablet or laptop). See
F.9 Help mode chapter).
AGENDA (MyPlanner/Agenda)
This function allows to plan oven activities, cooking or
cleaning programs or to set reminders, according to your
schedule (see F.10 Agenda mode (Calendar – My Planner)
chapter).
PLAN-N-SAVE/COOKING OPTIMIZER
This function allows you to optimise consecutive cooking
processes in order to reduce energy and water consumption
of the transition phases (see F.12 Plan&Save/Cooking Opti-
mizer mode chapter).
SKYDUO (optional for Skyline)
NOTE!
Available as option only on specific models combined
with the appropriate accessory.
This function can be activated on demand and works combined
with connectivity devices installed by specialised personnel. It
allows to connect the oven to a blast chiller (see F.13 SkyDuo
mode (optional for Skyline) chapter.
USB
The USB mode allows to upload/download, from or into the
appliance, programs or other data by means of the USB
pendrive. See F.11 USB mode chapter.
F.3 Touch screen commands / info and
display messages
The icons of this area allow the interaction with the oven or just
give information about the oven status or the accessories
connected.
Touch screen commands
Touch this icon to confirm and/or save the
selection
Touch this icon to discard the selection or close a
pop-up window
1. It can be the upper cavity burner or the bottom cavity burner or the boiler burner
16
!
Touch this icon to come back to the previous
menu
Touch this icon to start a cycle
Hold down this button for a few seconds to stop a
running cycle
Touch this icons to move between the pages
(horizontal scrolling) or increase/decrease a value
Touch this icons to move between the pages
(vertical scrolling)
Signalling information
Door open warning signalling icon
The icon appears when the door is open or not properly
closed
5
Fan speed level
Boiler in filling or heating phase
Not available in boilerless models
Boiler temperature too high
Not available in boilerless models
In gas models only:
Gas burner 1 blocked.
To reset the boiler ignition touch the green flame
icon .
Water injection
Reduced power
Blocking alarm
Display messages
Warnings
!
A pop up window appears on the display to show the warning
in progress.