Table of Contents
Advertisement
Detergent loading
IMPORTANT
In 20 Grids models run the cleaning cycles only
with trolley inside the oven. It helps the sealing in
closing the bottom openings between the cavity
and the door.
WARNING
Do not open the cooking cavity
door while cleaning cycle is
operating.
IMPORTANT
Do not use detergent or rinse aid powder dissolved in
water or in gel form and/or containing chlorine.
NOTE!
To ensure best cleaning results, as well as to protect
the oven with the cleaning programs, use the
detergents, rinse aid and descale agents suggested
by Electrolux Professional. In any case make sure
the supplier of the chemicals guarantees the deter-
gents and rinse aid agents feature fluid category 3 .
WARNING
Both chemical substances and hot
steam can escape from cavity with
risk of burns and scalding. Use
Gloves.
Always refer to the safety cards
and labels on the products used.
WARNING
Do not start any cooking cycle if
the cleaning cycle has not been
completed and/or after cleaning
cycle completion if there are still
detergent residuals, if any.
WARNING
In case of steam leakages from
the cavity door and/or visible
wearing or damage of cavity door
gasket, do not start any cleaning
cycle.
Call the Customer Care Service.
Special conditions – Display status
• Before starting any washing cycle, if the cavity is too hot, the
oven proceeds to a forced cooling:
CLEANING
US ER
01:0 5 h:m
Forced cooling
The oven cavity is too hot to
proceed with the washing.
Do you want to proceed with the
forced cooling?
• Running cycle
During the cycle the display shows:
– the remaining time
Page 46
Advertisement
Table of Contents
