Electrolux Combi TOUCH Series User Manual page 29

• Searing: dry thermal sealing of food
• Cooling
• Maturing: slow cooking
• Holding: keeping food at required temperature
AUTOMATIC
Low temp. Cooking
175
A
65
B
1. Set the SEARING temperature "A" ;
2. Set the final temperature of the PROBE "B"
3. Touch button to start the cycle.
IMPORTANT
During the preheating phase it is advisable to put
the probe outside the cavity.
Cycle displaying
• The cycle displaying can be customised as standard or
steps view. Open the lower drawer and touch the required
icon:
AUTOMATIC
Low temp.
Cooking
175
°C
65
°C
01:20 h:m
Standard Steps
view view
6:30 220°C 20°C
PM
°C
°C
AUTOMATIC
Low temp.
Cooking
1
15 % 160 °C 00:10 7
h:m
2
59 °C 00:20 h:m 7
3
4
15 % 160 °C 60 °C
65
65 °C
02:00 h:m 65
∞
60 °C
65
°C
70
°C
Saving presets
• Once the cycle is set, it is possible to save it as a preset;
Open the lower drawer and select the related icon.
AUTOMATIC
Low temp.
Cooking
175
01:20 h:m
Save
preset
6:30
PM
Managing presets
• If you have already saved Low Temperature Cooking presets,
they show up as a list.
Touch three dots to change image, rename or delete the
presets (see the same procedure in the How to manage
stored programs paragraph in F.7 Programs mode chapter).
AUTOMATIC USER
Low temperature
cooking
Elux preset 1
Elux preset 2
Elux preset 3
User preset name 1
User preset name 2
• Further actions can be done through the lower drawer.
See the available functions with presets through lower drawer
in the Presets management paragraph in this chapter.
At the end of the cycle the display shows the consumptions (if
available) as a recap message.
T
ECO DELTA COOKING
This special cycle adjusts the cavity temperature adjusts the
cavity temperature to maintain a constant difference (delta) with
the food core probe.
• Set the humidity value;
• Set the delta value for the cavity temperature;
• Then set the core probe temperature;
The display shows the set humidity value (A), for the cavity
temperature the delta value set (B) and for the probe the
current and the target values (C);
NOTE!
If creating more phases at least one of them must be
driven by probe with the cavity temperature set as a
delta from the food core temperature probe value.
Otherwise the START button is disabled and the
message "Eco delta cooking program invalid" pops
up.
USER
°C
65
°C
120°C 20°C
AUTOMATIC
Low temperature
cooking
Abc
Elux preset 1
Elux preset 2
Elux preset 3
User preset name 1
User preset name 2
USER
29