Specifications; Installation - Logik LBMFMX15 Instruction Manual

Specifications

Model
Voltage Rating
Power Rating
Energy Consumption
Cooker Dimensions H/W/D
Net Weight
Usable Capacity of the Oven
Temperature range
Energy Efficiency Class
Features and Specifications are subject to change without prior notice.

Installation

• The electrical connection of this oven should be carried out by a qualified electrician
following the instructions in the installation section of this manual and in compliance
with the current regulations.
• The oven is intended for household use only.
• This oven must be installed in compliance with local regulations.
• Wiring connections must be in accordance with Local Wiring Rules and any particular
conditions of the local authority.
• Refer to the data plate for rating information. The data plate is positioned behind the bottom
of the oven door. The wiring diagram is positioned on the rear panel of the appliance.
• A means of disconnection with a contact separation of at least 3mm must be supplied in the
fixed wiring.
• This appliance must be properly earthed.
• Do not lift the appliance by the door handles.
• Prepare the cupboard opening to match your appliance measurements. (See diagrams)
• Slide appliance into the cupboard, ensuring that the mains cable (where fitted) does not kink.
• To prevent tripping, secure your oven into the cupboard by fastening with the 2 screws
supplied.
• Ensure the cabinet is rated at a temperature suitable for built-in ovens. We cannot accept
responsibility for damage caused by installation into low temperature tolerant cabinets.
• After installation, test and ensure that the appliance operates correctly.
16
LBMFMX15
220 - 240V~, 50/60Hz
3000W (MAX)
Upper and Lower Heating : 0.99 kWh/cycle
Convectional : 0.87 kWh/cycle
59.5 (H) x 59.5 (W) x 57.5 (D) cm
33.5kg
64 L
50/250 ºC
A