M: Wireless Flash Shooting With Manual Flash; Multi: Wireless Flash Shooting With Manual Flash - Godox V1C Instruction Manual

Using Automatic Wireless Flash with Multiple Receiver Units
●
Press the depth-of-field preview button on the camera to fire a modeling
flash.
●
If the Receiver unit's auto power off function is workable, press the
Transmitter unit's test button to power it on. Please note that test firing is
unavailable during the camera's regular metering time.
●
The effective time of Receiver auto power off is changeable. (C.Fn-RX
STBY Page 55)
●
By making some settings, the auto AF-assist transmitter will not blink after
the Receiver unit's flash ready indicator is lightened. (C.Fn-AF Page 55)
Using Fully Automatic Wireless Flash
The FEC and other settings that set on the Transmitter unit will also
be appeared on the Receiver unit automatically. The Receiver unit
does not need any operation. Use the following settings to make
wireless flashes according to the same methods with normal flash
shooting.
● Flash Exposure Compensation (
● Flash Exposure Lock (Page 42)
● Manual Flash (Page 44)
● Stroboscopic Flash (Page 45)
About Transmitter Unit
Use two or more Transmitter units. By preparing several cameras
that with Transmitter units flash attached, cameras can be changed
in shooting while keeping the same lighting source (Receiver unit).
- 51 -
When stronger flash output or
more convenient lighting operation
is needed, increase the number of
Receiver units and set it as a
single Receiver unit.
To add Receiver units, use the
same steps as setting "automatic
wireless flash with a single
Receiver unit". Any flash group
can be set (A/B/C/D/E).
When the number of Receiver
units is increased and the
Transmitter unit flash firing is ON,
automatic control is implemented
to make all groups of flashes fire
the same flash output and ensure
the total flash output up is to
standard exposure.
Page 41)

7. M: Wireless Flash Shooting with Manual Flash

This describes wireless (multiple shooting) using manual flash. You
can shoot with a different flash output setting for each Receiver unit
(firing group). Set all parameters on the Transmitter unit.
1
2
3
Setting <M> Flash Mode
You can directly operate the Receiver unit to manually set the
manual flash or stroboscopic flash.
1
2
.
8

Multi: Wireless Flash Shooting with Manual Flash

Setting <MULTI> stroboscopic
flash.
● Press <MODE> button so that
CH 21
SONY
● Setting the stroboscopic flash.
Setting the flash mode to
<M>.
Setting flash
output.1/2/3/4<A/B/C/D>
● Press Function Button 3
< >. Turn the Select
Gr
Dial to set the flash output
of the groups. Press Set
Button to confirm.
Taking the picture.
● Each group fires at the set
flash ratio.
Setting the Receiver unit.
Setting flash mode to <M>.
● Press <MODE> button so
that <M> is displayed.
● Set the manual flash
output. (Page 44)
<MULTI> is displayed.
(Page 45)
- 52 -