Harvia FORTE Instructions Manual page 3

HARVIA FO RTE
Heater instructions
1.
Before bathing (LO-mode is ON):
1. Open the heater lid.
2. Press HI-mode button (A) and then press MENU button (B).
Adjust temperature with + and - buttons (C).
3. Wait for 5–15 minutes for the sauna room temperature to reach 50–60 ºC degrees.
In the sauna:
- Throw a small amount of water (max. 2 dl) at a time on the stones.
- Relax and enjoy the warmth.
- If the sauna room temperature rises too high, select LO-mode.
After bathing:
- Select LO-mode (D).
- Make sure that the sauna stones are dry.
- Lastly,v close the heater lid.
2.
A
D
3.
B
C