Table of Contents
Advertisement
122
Vision Series 5 Controller User Manual
Home to save the home position in the machine. If you want to save a new home position, move the
spindle to the desired position and press Set Home as described above.
If the machine is turned off, the user defined home position will be replaced with the factory home
position. To reset the machine to the user defined home position, Press Shift, then Set Home. The
machine will now use the user defined home position.
© 2019 Vision Engraving Systems
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 5 Series and is the answer not in the manual?
Questions and answers