Where To Place And How To Stabilize The Recumbent Bike - CYBEX R Series Assembly Instructions Manual

Where to Place and How to Stabilize the Recumbent Bike

Read the entire manual before setting up the bike. After following all Safety Instructions, move the bike to the
location where it will be used. Allow a clearance of 2 ft. (0.6 m) in the directions the bike is accessed from and 3 ft.
(1 m) between the front or rear of the bike or any other objects.
Free area
After placing the unit in position, check the unit's stability by attempting to rock it from side to side. Any slight
rocking indicates that the unit must be leveled. Determine which foot is not resting completely on the floor. Loosen
the jam nut with an open-end M17 wrench and rotate the stabilizing foot to lower it. Verify that the bike is stable,
and repeat the adjustment as necessary until the unit no longer rocks. Lock the adjustment by tightening the jam
nut against the stabilizing bar.
3 ft. (1 m)
2 ft. (0.6 m)
2 ft. (0.6 m)
Item
1
2
Page 9 of 25
3 ft. (1 m)
Description
Jam Nut
Stabilizing Leg
Qty.
4
4