Quick Access Softkeys - Raven ISOBUS Product Control Installation & Operation Manual

C 5
HAPTER

QUICK ACCESS SOFTKEYS

The quick access softkeys allows the operator to quickly access frequently used functions as well as the calibration
and configuration screens.
MASTER SWITCH
The status of the master switch is displayed in the quick access bar. Select the switch status indicator to toggle the
master switch.
NOTE: Both the remote master (foot switch) and the master switch indicator must be toggled on to apply
product. See the Remote Master Status section on page 39 for more information on the remote
master switch.
RATE INCREASE/DECREASE BUTTONS
Use the rate increase and decrease buttons to adjust the target or actual application rate based on the control
mode (auto/manual) currently selected.
NOTE: When Rate 1 and Rate 2 are set as described in Rate Bump (+/-) section on page 29, the increase/
decrease (+/-) buttons are replaced with Rate 1/Rate 2 buttons.
TOOLS ICON
Select the tools icon to access the calibration screens. See Chapter 4, ISOBUS Product Control Node Calibration,
for more information.
TALLY REGISTERS
Select the tally registers icon to view the volume and area registers. See the Tally Registers section on page 46 for
more information on the tally registers.
38
Fan Switch or
Boost Pump
ISOBUS Product Control Installation & Operation Manual
Quick Access
Softkeys
Master
Switch
Rate Increase
Button
Rate Decrease
Button
Tools
Icon
Tally
Registers