Recalling Data; Deleting Data - X-Rite COLOREYE XTH Operation Manual

OPERATION
5. To enter a name, proceed as follows:
a. The cursor appears at the first character, even if you will use the
standard or prefix name as part of the new name. You can use 16
place holders for the name.
b. Press the Enter key to scroll through the list of possible characters for
each place holder. If the place holder initially has no character displayed,
the characters scroll through 0 through 9 first, then A through Z, then a
blank space. If you are editing an existing name, the characters will begin
scrolling to the next character in the sequence, rather than starting at 0.
You can press and hold the Enter key to scroll quickly, or press the Enter
each time you want to increment in the character list, one character at a
time. When you have reached the desired character, go to step c.
c. Move the cursor to the next place holder using the right arrow key to move
to the right one place holder or use the left arrow key to move the left one
place holder. You can press and hold the arrow keys to move the cursor
quickly, or press the arrow key each time you want to increment in the
place holder list, one place at a time.
d. Repeat steps b and c for each character in the desired name.
6. When you are finished entering the name, save the name by scrolling the cursor to
the [save] at the bottom of the screen. When the [save] (lowercase) changes to
[SAVE] (uppercase), press Enter. The data is saved.

Recalling Data

You may recall a standard or trial to the display that has been saved to the database.
1. Select DATA from the ColorEye XTH Main Menu.
2. Select RECALL from the Data Menu.
3. Select STANDARD or TRIAL from the Recall Menu.
4. The list of saved standards or saved trials appears.
5. Use the left (scroll up) or right (scroll down) arrow keys to move the cursor to the
desired measurement to recall. If the list of standards or trials is very long and
continues past one screen, scroll the cursor to the [next] at the bottom of the
screen. The list continues to the next screen of saved data.
6. When the data to recall is shown as CAPS (capital letters), press Enter.
7. The data for the measurement you selected appears on the display appropriately
as the standard or trial.
An associated option to Recalling Data is "Recent Recalls" which lists the most recently
recalled data. For more information, refer to "Recent Recalls" on page 3-3.

Deleting Data

The ColorEye XTH is capable of storing 500 measurements. You may need to delete some
previously saved measurements if you are no longer using some of the data, or need to make
room for new measurements. To delete data, proceed as follows:
1. Select DATA from the ColorEye XTH Main Menu.
2. Select DELETE from the Data Menu.
3. Select STANDARD or TRIAL from the Delete Menu.
4. The list of saved standards or saved trials appears.
5. Use the left (scroll up) or right (scroll down) arrow keys to move the cursor to the
desired measurement to delete. If the list of standards or trials is very long and
continues past one screen, scroll the cursor to the [next] at the bottom of the
screen. The list continues to the next screen of saved data.
6. When the cursor is at the data to delete, press Enter. An asterisk (
to the data.
3-2
*
) appears next