Emptying The Grass Catcher - Black+Decker BEMW472BH Instruction Manual

English

WARNING: Do not work towards the cable as shown
in Fig. K.
Fig. J
5
Fig. K

Emptying the grass catcher

1. Release the ON/OFF switches
2. Remove the grass catcher
3. Empty the contents.
Cable storage (Fig. N)
The cable holders 6 provide a safe and convenient way to
store the extension cord when not in use.
1. Wrap the extension cord around the cable holders in a
Figure eight pattern.
Fig. N
8
and unplug the mower.
3
8 .
6
Carrying the mower (Fig. A)

WARNING: Rotating blade can cause serious injury.
Release both ON/OFF switches
and unplug mower before lifting, transporting, or
storing the mower. Store in a dry place.
• The mower can be carried using the convenient carry
handles 10 .
Removing Blade (Fig. O, P)

WARNING: Ensure the blade has completely stopped
and disconnect the mower from the power source.

WARNING: Only use the specified replacement blade:
BEMW472BH and BEMW482BH release ON/OFF
switches 2 to turn mower off, WAIT FOR THE BLADE
TO STOP, AND UNPLUG MOWER.

CAUTION: Whenever the blade is being removed,
installed or sharpened, wear gloves and proper eye
protection. Be careful of sharp edges on blade.
1. Cut a piece of 2x4 wood
(305 mm) to keep blade from turning while removing
flange nut.
2. Turn the appliance onto its side.
nOTE: Wear gloves and proper eye protection. Be
careful of sharp edges of blade.
3. Position piece of wood 14
as shown in Fig. M.
4. Use a 9/16 inch wrench 16
blade bolt by turning counterclockwise.
15
5. Pull off blade , blade insulator
17
Fig. N. Examine all pieces for damage and replace
if necessary.
Fig. O
14
Fig. P
3 to turn mower off
14 (about 1 foot long)
to keep blade from turning
to loosen and remove the
, as shown in
18
16
17
17
15
18