Operation; Charging; Connecting To Power Supply - Stihl FSA 57 Instruction Manual

Hide thumbs Also See for FSA 57:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 33
4 Safety Precautions
4.7

Operation

WARNING
■ The user cannot concentrate on the work in certain
situations. The user may stumble, fall and be seriously
injured.
► Work calmly and carefully.
► If light and visibility are poor: Do not use your trimmer.
► Operate the trimmer alone.
► Keep the cutting attachment close to the ground.
► Watch out for obstacles.
► Stand on the ground while working and keep a good
balance.
► If you begin to feel tired: Take a break.
■ The rotating cutting attachment can cut the user. This can
result in serious injuries.
► Do not touch the rotating cutting attachment.
► If the cutting attachment is blocked by an object: Switch
off the trimmer and remove the battery. Then remove
the object causing the blockage.
■ If the behavior of the trimmer changes during operation or
feels unusual, it may no longer be in a safe condition. This
can result in serious injuries and damage to property.
► Stop work, remove the battery and contact your STIHL
servicing dealer for assistance.
■ Trimmer vibrations may occur during operation.
► Wear gloves.
► Take regular breaks.
► If signs of circulation problems occur: Seek medical
advice.
0458-806-9621-A
■ If the cutting attachment makes contact with a foreign
object during operation, the object or parts of it may be
thrown at high speed. This may result in personal injuries
and damage to property.
► Clear away all foreign objects from the work area.
■ Note that the cutting attachment continues to rotate for a
short period after you release the trigger. This can result
in serious injuries.
► Wait until the cutting attachment comes to a complete
stop.
4.8

Charging

WARNING
■ A damaged or defective charger may produce an unusual
smell or emit smoke during the charging process. This
may result in personal injuries and damage to property.
► Disconnect the plug from the wall outlet.
■ The charger can overheat and cause a fire if heat
dissipation is inadequate. This can result in serious or
fatal injuries and damage to property.
► Do not cover the charger.
4.9

Connecting to Power Supply

Contact with live components may occur for the following
reasons:
– The connecting cable or extension cable is damaged.
– Connecting cable plug or extension cable is damaged.
– Wall outlet is not properly installed.
English
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents