Safety Regulations - Ariston ALTEAS ONE Net Series Installation And Servicing Instructions

SAFETY REGULATION
Key to symbols:
Failure to comply with this warning
implies the risk of personal injury, in some
circumstances even fatal
Failure to comply with this warning
implies the risk of damage, in some
circumstances even serious, to property,
plants or animals.
Install the appliance on a solid wall which is not
subject to vibration.
Noisy operation.
When drilling holes in the wall for installation
purposes, take care not to damage any electrical
wiring or existing piping.
Electrocution caused by contact with live
wires. Explosions, fi res or asphyxiation caused
by gas leaking from damaged piping.
Damage to existing installations.
Flooding caused by water leaking from
damaged piping.
Perform all electrical connections using wires
which have a suitable section.
Fire caused by overheating due to electrical
current passing through undersized cables.
Protect all connection pipes and wires in order to
prevent them from being damaged.
Electrocution caused by contact with live
wires. Explosions, fi res or asphyxiation caused
by gas leaking from damaged piping.
Flooding caused by water leaking from
damaged piping.
Make sure the installation site and any systems
to which the appliance must be connected comply
with the applicable norms in force.
Electrocution caused by contact with live wires
which have been installed incorrectly.
Damage to the appliance caused by improper
operating conditions.
Use suitable manual tools and equipment (make
sure in particular that the tool is not worn out
and that its handle is fi xed properly); use them
correctly and make sure they do not fall from
a height. Replace them once you have fi nished
using them.
Personal injury from the falling splinters or
fragments, inhalation of dust, shocks, cuts,
pricks and abrasions.
Damage to the appliance or surrounding
objects caused by falling splinters, knocks and
incisions.
Use electrical equipment suitable for its intended
use (in particular, make sure that the power
supply cable and plug are intact and that the
parts featuring rotary or reciprocating motions
are fastened correctly); use this equipment
correctly; do not obstruct passageways with the
power supply cable, make sure no equipment
could fall from a height. Disconnect it and replace
it safely after use.
Personal injury caused by falling splinters
or fragments, inhalation of dust, knocks,
cuts, puncture wounds, abrasions, noise and
vibration.
Damage to the appliance or surrounding
objects caused by falling splinters, knocks and
incisions.
Make sure any portable ladders are positioned
securely, that they are suitably strong and that
the steps are intact and not slippery and do not
wobble when someone climbs them. Ensure
someone provides supervision at all times.
Personal injury caused by falling from a height
or cuts (stepladders shutting accidentally).
Make sure any rolling ladders are positioned
securely, that they are suitably strong, that the
steps are intact and not slippery and that the
ladders are fi tted with handrails on either side of
the ladder and parapets on the landing.
Personal injury caused by falling from a height.
During all work carried out at a certain height
(generally with a difference in height of more
than two metres), make sure that parapets are
used to surround the work area or that individual
harnesses are used to prevent falls. The space
where any accidental fall may occur should be
free from dangerous obstacles, and any impact
upon falling should be cushioned by semi-rigid or
deformable surfaces.
Personal injury caused by falling from a height.
Make sure the workplace has suitable hygiene
and sanitary conditions in terms of lighting,
ventilation and solidity of the structures.
Personal injury caused by knocks, stumbling
etc.
Protect the appliance and all areas in the vicinity
of the work place using suitable material.
Damage to the appliance or surrounding
objects caused by falling splinters, knocks and
incisions.
OVERVIEW
/ 5