Electrolux ESL5205LO User Manual page 9

3. Press on/off to confirm the setting.
6.3 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
Make sure the appliance is in user mode.
1. Press the programme button
immediately.
• The indicator
on.
• The indicator
2. Wait until the indicator
are off. The indicator
flashes.
• The indicator shows the
current setting:
Acoustic signal off.
3. Press the programme button to
change the setting.
• indicator on = Acoustic signal
on.
4. Press on/off confirm the setting.
6.4 AirDry
AirDry improves the drying results with
less energy consumption.
and are
AirDry is automatically activated with all
flashes.
programmes excluding
and
still
indicator off =
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press the programme button twice.
2. Wait until the indicators
3. Press the programme button to
4. Press on/off to confirm the setting.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
CAUTION!
If children have access to
the appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
• The indicators
are on.
• The indicator
are off. The indicator
flashes.
• The indicator shows the
current setting:
deactivated.
change the setting.
• on = AirDry is activated.
ENGLISH 9
.
and
flashes.
and
still
off = AirDry is