e-SHOT (Still Image Transfer) Display
e-SHOT (Still Image Transfer) Display
The projector can dsplay a stll mage that s transferred va the network.
Communication Port
The following port is used for e-SHOT.
TCP #9716
NOTE
• e-SHOT is not available via communication ports which are used for
the command control (TCP #23 and TCP #9715).
e-SHOT (Still Image Transfer) Settings
Configure the following items from a web browser when e-SHOT is used.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter [https://192.168.1.10] nto the address bar of the web browser.
2) E nter the Admnstrator ID and Password and
clck [Logon].
3) Clck [Port settings] on the man menu.
4) C lck the [Enable] check box to open the [Im-
age Transfer Port (Port: 9716)]. Clck the
[Enable] check box for the [Authentication]
settng when authentcaton s requred, other-
wse clear the check box.
5) Clck the [Apply] button to save the settngs.
ViewSonic
PJ1158
86