Power On/Off; TurnNg On The Power; TurnNg Off The Power - ViewSonic PJ1158 User Manual

Power on/off

Power on/off
Turning on the power
1.
Make sure that the power cord is firmly and cor-
rectly connected to the projector and the outlet.
2.
Remove the lens cover, and set the power swtch to
the ON poston.
The power ndcator wll lght up n steady orange. Then
wat several seconds because the buttons may not func-
ton for these several seconds.
(1) When AUTO ON in OPTION menu is set to TURN ON :
The lamp wll only be automatcally turned on when the
Power swtch s turned on after the power was turned off by
Power swtch last tme. Afterwards the POWER ndcator
wll begn blnkng n green. When the power s completely
on, the ndcator wll stop blnkng and lght n green.
(2) When AUTO ON in the OPTION menu is set to TURN OFF :
Please see step 3.
3.
Press the STANDBY/ON button on the projector or the re-
mote control.
To dsplay the pcture, select an nput sgnal accordng to the secton
"Selecting an input signal".
Turning off the power
1.
Press the STANDBY/ON button on the projector or the remote
control.
The message "Power off?" will appear on the screen for about 5
seconds.
2.
Press the STANDBY/ON button on the projector or the remote
control agan whle the message appears.
The projector lamp wll go off, and the POWER ndcator wll begn
blnkng n orange.
Then the POWER ndcator wll stop blnkng and lght n steady
orange when the lamp coolng s complete.
3.
Make sure that the power ndcator lghts n steady orange, and set the power
swtch to the OFF poston. The POWER ndcator wll go off. Attach the lens cover.
Do not turn the projector on for 10 mnutes or more after turnng t off. Turnng the projector
on agan too soon could shorten the lfetme of some consumable parts of the projector.
WARNING ►A strong lght s emtted when the projector's power s on. Do not look nto the lens
of the projector or look nsde of the projector through any of the projector's openngs.
►Do not touch around the lamp cover and the exhaust vents durng use or just after use,
snce t s too hot.
NOTE • Turn the power on/off n rght order. Please power on the projector pror to
the connected devces. Power off the projector later than the connected devces.
• Use the shutdown swtch only when the projector s not turned off by normal procedure.
ViewSonic PJ1158
STANDBY/ON
button
LASER
INDICATOR
STANDBY/ON VIDEO RGB
BLANK LASER
ASPECT
ENTER
PUSH
PAGE UP PAGE DOWN
ESC MENU RESET
POSITION AUTO
MAGNIFY MY BUTTON VOLUME
ON 1
MUTE
OFF 2
FREEZE KEYSTONE SEARCH
(Steady orange)
(Blnkng n green)
(Blnkng n orange)
(Steady orange)
POWER
ndcator
POWER
POWER
POWER
(Steady green)
Power off?
POWER
POWER
16