Optional Log Set Placement Instructions - Quadra-Fire CB1200 Installation Manual

CB1200 Pellet Insert
H. Optional Log Set Placement Instructions
CAUTION
Logs are FRAGILE. Use extreme care when handling
or cleaning logs.
1. Place the front log in first as shown in Figure 28.1
charred area surrounding fire pot.
2. Set the left and right logs onto the front log, placing
the holes in the base of the left and right logs over the
locating pins in the front log. See Figure 28.2. Ensure
that the charred ends are facing the fire pot.
LOCATING PINS
Figure 28.1
Charred Areas in the Back
Top Log, Left
Figure 28.2
NOTE: Due to the abrasive nature of a pellet appliance
fire, the logs are not covered under warranty. Any
placement variation other than shown here can
cause excessive heat and shall void the appliance
warranty.
28
Top Log
Right
Front Log
7014-285C August 1, 2018