Frequently Ordered Accessories For Rp5 Design - MTS Systems Temposonics R V Series Operation Manual

4.7 Frequently ordered accessories for RP5 design

Position magnets
43
(1.69)
20
(0.79)
M5
40 (1.57)
Magnet slider S, joint at top
Part no. 252 182
Material: GRP, magnet hard ferrite
Weight: Approx. 35 g
Operating temperature:
−40...+85 °C (−40...+185 °F)
Position magnets
Ø 32.8
(Ø 1.29)
Ø 4.3
(Ø 0.17)
Ø 23.8
(Ø 0.94)
7.9
Ø 13.5
140°
(0.31)
(Ø 0.53)
U-magnet OD33
Part no. 251 416-2
Material: PA ferrite GF20
Weight: Approx. 11 g
Surface pressure: Max. 40 N/mm
Fastening torque for M4 screws: 1 Nm
Operating temperature:
−40...+105 °C (−40...+221 °F)
Controlling design dimensions are in millimeters and measurements in ( ) are in inches
– Additional options available in our
14
57 (2.24)
(0.55)
49 (1.93)
40 (1.57)
Magnet slider V, joint at front
Part no. 252 184
Material: GRP, magnet hard ferrite
Weight: Approx. 35 g
Operating temperature:
−40...+85 °C (−40...+185 °F)
Ø 4.3 33 (1.3)
(Ø 0.17)
19.5 (0.77)
8 ± 2 (0.31 ± 0.08)
Distance to sensor element
Block magnet L
Part no. 403 448
Material: Plastic carrier with hard ferrite
magnet
Weight: Approx. 20 g
2
Fastening torque for M4 screws: 1 Nm
Operating temperature:
−40...+75 °C (−40...+167 °F)
This magnet may infl uence the sensor
performance specifi cations for some
applications.
Accessories Guide 551 444
43
14
(1.69)
20
(0.55)
(0.79)
M5
40 (1.57)
Magnet slider N
longer ball-joint arm
Part no. 252 183
Material: GRP, magnet hard ferrite
Weight: Approx. 35 g
Operating temperature:
−40...+85 °C (−40...+185 °F)
Mounting accessories
4 holes
Ø 5.3 (Ø 0.21) 28 (1.1)
50 (1.97)
14
68 (2.68)
(0.55)
Mounting clamp width
14.6 (0.57)
Mounting clamp
Part no. 400 802
Material: Stainless steel (AISI 304)
I 19 I
R-Series V Analog
Temposonics
®
24
(0.94)
(0.79)
M5
40 (1.57)
Magnet slider G, backlash free
Part no. 253 421
Material: GRP, magnet hard ferrite
Weight: Approx. 25 g
Operating temperature:
−40...+85 °C (−40...+185 °F)
M5 thread
9 (0.35)
4
(0.16)
8
:
(0.31)
T-nut
Part no. 401 602
Fastening torque for M5 screw: 4.5 Nm
Operation Manual
42 15.2
(0.6)
(1.65)
20
M5
11.5
(0.45)
4.5
(1.8)