Bluetooth® Operation; Usb Operation - Hitachi AXM950E Instruction Manual

Bluetooth® Operation
The unit has a Bluetooth function that can receive a signal within 8 metres.
Pairing the unit with a Bluetooth device to listen to music:
While in the ON mode, turn the FUNCTION dial on the unit or press the DOCK/BT
1.
button on the remote control to select BT mode.
2. Press and hold the
GB
3. Activate your Bluetooth device and select the search mode.
4. "BLUEPORT" will appear on your Bluetooth device.
5. Select "BLUEPORT"" and enter "0000" for the password if necessary.
6. To disconnect the Bluetooth function, switch to another function on the unit or disable
the function from your Bluetooth device.
If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter
pairing mode automatically.

USB Operation

1. While in the ON mode, turn the FUNCTION dial on the unit or press the USB button on
the remote control to select USB mode.
Connect a USB device to USB port directly or with a USB cable (not included).
2.
3. The unit will automatically starts playback.
4. Press the
5. Press the
6. Press the
memory device has more than one folder).
7. Press the
• The unit can only play MP3 and WMA file formats in USB operation.
• This unit supports USB versions 1.1 and 2.0.
• The unit can support USB devices with up to 32GB of memory.
• The unit cannot play WMA files protected by "DRM FILE".
• The unit may not be compatible with all USB devices, this is not an
indication of a problem with the unit.
34
/PAIR button until the display flash "PAIRING".
button to start /pause / resume playback.
buttons to skip backwards or skip forwards.
buttons on the remote control to select the desired folder (if the USB
button to stop playback.