Advertisement
Tools Required
-#33 (.113 dia.) Drill (Jobbers length)
-Electric drill
-5/32" Allen wrench (provided)
-Phillips head screwdriver
-Plastic mallet
The Corner TechOrganizer can be installed on Linx
Worksurfaces or appropriate industrial work benches.
LINX Worksurfaces with full depth uprights are
recommended to provide a Workstation/Organizer
with greatest stability.
Important Safety Instructions
* The Organizer must be properly secured to the Work-
surface prior to installing of components.
* Frame load capacity is 300 lbs. (Linx worksurfaces)
400 lbs. (Workbenches).
* Do not install shelves that are greater than 18" deep.
* Do not install shelves more than 35" above the Work-
surface.
1. Assemble Left hand and Right hand Organizer frames
to the Corner post with the 1/4"-20 x 1-5/8" Button
head cap screws provided. See Figure 1.
85081
C o r n e r
T e c h O r g a n i z e r
Rev A 11/20/07
Corner TechOrganizer
Corner post
L.H. Organizer
frame
1/4"-20 x 1-5/8" Button
head cap screws
Figure 1
1
R.H. Organizer
frame
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eaton Wright-Line TechOrganizer Corner
Summary of Contents for Eaton Wright-Line TechOrganizer Corner
- Page 1 C o r n e r T e c h O r g a n i z e r Tools Required -#33 (.113 dia.) Drill (Jobbers length) -Electric drill -5/32” Allen wrench (provided) -Phillips head screwdriver -Plastic mallet Corner TechOrganizer The Corner TechOrganizer can be installed on Linx Worksurfaces or appropriate industrial work benches.
- Page 2 C o r n e r T e c h O r g a n i z e r #10AB x 2.25” Phillips 2. With two people, position the TechOrganizer in the flat head screws desired location on the back of the Worksurface. On a Linx Worksurface, locate the back of the frame .20”...
- Page 3 T e c h O r g a n i z e r I n s t a l l a t i o n P h e n o l i c C o r n e r T e c h B e n c h TOOLS REQUIRED (1) #19 drill bit (not supplied) (1) 7/32”...
- Page 4 T e c h O r g a n i z e r I n s t a l l a t i o n P h e n o l i c C o r n e r T e c h B e n c h 4.
Need help?
Do you have a question about the Wright-Line TechOrganizer Corner and is the answer not in the manual?
Questions and answers