Instruction Sheet
IL211025 EN
TechBench Full Shelf
TOOLS REQUIRED
(1) Phillips screwdriver (not supplied)
(1) Plastic mallet (not supplied)
TOOLS REQUIRED
Tools Required
(1) Phillips screwdriver (not supplied)
•
(1) Phillips screwdriver (not supplied)
(1) Plastic mallet (not supplied)
•
(1) Plastic mallet (not supplied
1. Determine the location for the Full Shelf and attach
1.
Determine the location for the Full Shelf and attach the
the Brackets to the TechBench
Brackets to the TechBench™ as shown in figure 1.
NOTE: Be sure that the Brackets are at the same
NOTE: Be sure that the Brackets are at the same
level.
level.
1.
Determine the location for the Full Shelf and attach the
Tap the top of each Bracket with a plastic mallet to
Tap the top of each Bracket with a plastic mallet to
Brackets to the TechBench™ as shown in figure 1.
ensure that the hooks are fully seated.
ensure that the hooks are fully seated.
NOTE: Be sure that the Brackets are at the same
level.
2. Lock each Bracket in place using two #10-24 x
2. Lock each Bracket in place using two #10-24 x 3/8"
Tap the top of each Bracket with a plastic mallet to
pancake phillips head screws (provided).
pancake phillips head screws (provided). See figure 2.
ensure that the hooks are fully seated.
See figure 2.
2. Lock each Bracket in place using two #10-24 x 3/8"
pancake phillips head screws (provided). See figure 2.
91649
Rev. __
as shown in figure 1.
™
Figure 1.
Figure 1
Figure 1
Date:
Effective May 2018
Supersedes 91647
Linear TechBench™ Full Shelf
Linear TechBench
⁄8"
3
Right Hand Bracket
Right Hand Bracket
#10-24 x 3/8" phillips
head screws
#10-24 x 3/8" phillips
head screws
1
Full Shelf
™
Linear TechBench™ Full Shelf
Slots
Hooks
Slots
Hooks
Figure 2.
Figure 2
Figure 2
Need help?
Do you have a question about the TechBench Full Shelf and is the answer not in the manual?
Questions and answers