MBT SMARTING 24 User Manual page 77

After that, location files are ready to be used in SMARTING mobile
application. If file structure is appropriate, electrode layout will be displayed
properly. If this is not the case, the layout will be deleted from a list of
available layouts, with the error message.

Prepare the input file to use in SMARTING Streamer PC application:
- The location file can be stored at any PC folder
When the application has been started, the option Choose layout will be
available in the lower left corner of the main window (standard layout is
offered by default). From the dropdown menu (Figure 14.1), choose the load
new layouts option. When clicked, choose the folder where the layout files
are stored. After that, all .txt files from selected directory will be added to the
layout list.
When the layout format of the chosen file is not appropriate, that layout is
automatically deleted from dropdown menu and the displayed layout is
automatically set to motor layout.

Update for layouts with less than 24 electrodes
If one does not intend to use/specify all 24 channels, simply writing NA in
place of a non-used electrode will make the electrode not recording.
Example for first 5 channels with 2 unused electrodes:
Fp1
NA
NA
F7
F8
74
-2.7 8.6
-6.7 5.2
6.7 5.2
SMARTING User Manual – Release 11/03/2019
3.6
3.6
3.6