Streaming Signal With 500 Hz Sampling Frequency And The Impedances Switched On - MBT SMARTING 24 User Manual

Figure 6.5 The main window when the measure impedance on ref and 500 Hz mode
boxes are selected. At this point it is possible to get the information on the battery
level (18), percentage of the lost packages in the last 5 seconds of streaming (19) as
well as for cumulative number of lost packages (20).
6.4 Using the measure impedance option
For measuring impedances, 500Hz sampling mode needs to be selected.
Once the signal streaming has started, the main window looks like the one
depicted in Figure 6.6. The electrode layout appears on the brain sketch in
the bottom-left panel of the streamer (17). The color coded or the numeric
impedance values (depending on what is selected under number 7 in Figure
6.4) will appear on the brain sketch.
At the same time, the battery indicator becomes active (18) and the battery
percentage is shown (Figure 6.6).
Also, the box that shows the percentage of lost packages (average in last 5
seconds of streaming) (19) and the counter of the total number of lost
packages (20) become active, as depicted in Figure 6.6.
18 SMARTING User Manual – Release 11/03/2019