MBT SMARTING 24 User Manual page 56

In the open sesame application, select and run the wanted experiment.
Upon experiment completion, return to the SMARTING application and
cease the recording (the information about recorded events will be
presented in the recording summary window – Figure 8.23).
NOTE: OpenSesame is the open-source software no longer actively
maintained for Android. The user opting for this tool should ensure the
reliability of the experiments first.
8.6.1.2 Recording ERP experiments with the Neurobs® Presentation
software
Neurobs® Presentation ERP experiments can be written in solely in the XDF
file format. In order to record the presentation experiments, enable
presentation in the recording settings window (as explained in the Section
8.3.3.3.).
Next step is to enter the Presentation application and select the desired
experiment from the experiment list (Figure 8.24a) and enter the experiment
main screen (Figure 8.24b) in order to initialize the presentation stream.
Note: do not run the experiment itself at this moment! After entering the
experiment, return to SMARTING application and name the recording file in
the main window (as shown in Figure 8.17). Upon naming the file, select the
signal display button (A34, Figure 8.16).
(a) (b)
Figure 8.24 The overview of the Presentation application; (a) – experiment list and
(b) – the experiment main screen
NOTE: If the SMARTING application experience difficulties in opening the
presentation stream, the following warning will pop-up: "Error in stream
opening – Please return to the main window and retry." If the warning
SMARTING User Manual – Release 11/03/2019 53