Recording The Eeg Signals From Smarting Streamer - MBT SMARTING 24 User Manual

visualization, manual values between 200 and 500 µV represent good
practices.
- For visual inspection, the user can pause the Signal display by
pressing the pause button (31). Note: by pressing the pause button,
the user just pauses the signal visualization, but not the signal
acquisition, streaming or recording;
- The EEG signals can be recorded directly by the streamer. The EEG
signals can be recorded in .BDF or .XDF file formats. By pressing the
record button (32), the Recording window pops-up, where the user
can choose the recording options (more on the signals recording will
be presented in the subsequent subchapter 6.8). The user can also
stop the recording by clicking the same button (32);
- The time length of the recorded file can be tracked during recording
(33);
- If any loss of packages occurs, the cumulative number of package loss
is continuously visualized (34).
6.8 Recording the EEG signals usng Smarting streamer
For recording the signals from SMARTING streamer, click on the recording
button (number 32 from Figure 6.11). Once the recording button is clicked on
the Recording window pops-up (Figure 6.12), where the user chooses if the
recording will be made in .XDF (by checking the XDF file – 35) or .BDF (by
checking the BDF file – 36) file format.
Figure 6.12 The Recording window overview
SMARTING User Manual – Release 11/03/2019 25