MBT SMARTING 24 User Manual page 18

connecting SMARTING to your PC, Figure 5.4).
Optionally, it is possible to rename the EEG stream (3), in case you are
planning to record multiple EEG streams. Finally, by clicking the connect
button (4), SMARTING device will connect to the streamer.
Figure 6.3 The pop-up window in which the COM port can be selected (2).
Additionally, the EEG stream name (3) can be modified. The device connects to the
Once SMARTING is connected the white slider (positioned in the upper-left
corner of the Streamer) slides leftwards and the head silhouette turns orange
(see Figure 6.4). At this point it is possible to choose the following options
from the main window (Figure 6.4):
- The Choose Layout menu (5) allows selecting the layout that
corresponds to the EEG cap that is used for recording (Standard,
Motor or cEEGrid). To load or create custom layouts refer to chapter
14;
- The color-coded impedance values can be setup by changing the
values inside the boxes (6);
streamer by clicking the connect button (4).
SMARTING User Manual – Release 11/03/2019 15