Closing The Signal Display Window And Disconnecting The Amplifier; Software Update - MBT SMARTING 24 User Manual

6.9 Closing the Signal display window and disconnecting the amplifier

To close the display window, simply click hide signals button in the main
window, or close the Signal display window by clicking the x button in the top
right corner.
When the measurement is finished, click the disconnect button in the upper
left corner of the streamer's main window (Figure 6.4) to put the device in
idle mode.

6.10 Software update

Once the updated version of the streamer is available, Smarting Streamer will
notify the user.
If the new update contains major modification, the update notifications will
pop-up prior to entering the streamer (as shown in Figure 6.18). The user will
be asked to choose one of the following options:

update the streamer;

get the new notification in 7 days;

To ignore the current update (by choosing the option never in
Figure 6.18), or

To cancel the notification and receive the update notification next
time when the streamer starts.
30
Figure 6.18 The update notification window
SMARTING User Manual – Release 11/03/2019