MBT SMARTING 24 User Manual page 44

8.3.1 Impedance Settings
The color coded values are set by default to values 10, 20, 30 or 40 kΩ, and
above 40 kΩ as depicted in Figure 8.8a. However, the thresholds for color
coded values can be manually set by clicking on the desired color and
entering the new threshold value in pop-up window, as shown in Figure 8.8b.
(a) (b)
Figure 8.8 Impedance settings window
8.3.2 Touchscreen marker settings
In touch marker settings window, the user can enable/disable sound for
touch markers (A12 in Figure 8.9a). Furthermore, the user can change the
marker names by clicking on the marker that should be renamed and enter
the desired name in the pop-up window (as shown in Figure 8.9b). Note: the
marker names can be written only in XDF file format. In the BDF file format
the markers will appear in file with generic annotations, namely as 101,
102, 103, 104.
SMARTING User Manual – Release 11/03/2019 41