Custom Electrode Layouts - MBT SMARTING 24 User Manual

14. Custom electrode layouts


Input file structure
Electrode configuration file (Loc file) must contain 24 lines in a defined
format in order to work properly
Example for proper formatting (one line example):
FT8 7.6
FT8 - Name of electrode, 7.6, 2.8 ,and 3.6 are X, Y and Z coordinates.
File name
File name of the LOC file may be chosen arbitrarily, and the file type should
be .txt
Coordinate ranges
X, Y and Z coordinate must be in the range between 0 and 12
All parameters can be chosen arbitrarily within the defined range, but good
practice is to rewrite parameters from the following link:
www.easycap.de/e/downloads/electrode_sites_coordinates.htm

Prepare input file to use in SMARTING mobile application
- File must be stored at External Storage;
- If there are other .txt files at External Storage move them to other
directories;
- Application supports maximum 5 location files. Therefore it is important to
remove other .txt files.
2.8 3.6
SMARTING User Manual – Release 11/03/2019 73