Settings - MBT SMARTING 24 User Manual

8.3 Settings

It is advisable the check all the recording parameters, settings and enabled
sensor streams before initiating the recording. For this, the button settings
should be chosen (A4 in Figure 8.6). By clicking the settings button, the
settings menu appears (Figure 8.7) and user can choose between the
following options:
- Amplifier settings
o Disable or enable the impedances (A5);
o Enable or disable the test signal (A6).
o sampling frequency settings – 500 or 250 Hz (A7)
- Application settings
o Impedance settings – Modification of the color-coded
o Touchscreen marker settings – enabling/disabling the sound
o Recording settings (A10).
o LSL stream settings – choosing which data will be streamed
40
impedance threshold (A8)
on touch markers and modification of touchscreen marker
names (A9);
to local area network (LAN) over LSL protocol (A11); Note:
this option is available for 250Hz sampling frequency only.
Figure 8.7 The settings window overview
SMARTING User Manual – Release 11/03/2019