Installation Of Dlp Composer (Tm) Lite And Preparations - Mitsubishi Electric SD206U Service Manual

INSTALLATION OF DLP COMPOSER (TM) LITE AND PREPARATIONS

Outline
DLP Composer (TM) Lite is a program used for downloading
the fi rmware to the ROM in the projector, adjusting ADC offset,
and obtaining the warning history.
Operating conditions
® ®
Microsoft Windows 98/Me/XP shall operate correctly.
(This program doesn't run on Windows
use SE or later.)
A display device supporting VGA (640 x 480) or above is
required.
Necessary fi les
The following fi les are necessary to run the program.
- [DLP Composer (TM) Lite] : Program for download
- [BP_DDP2000_Library_35] : folder
Installing [DLP Composer (TM) Lite]
1. Double-click [DLP Composer Lite v3.6 Setup.exe].
2. Installation starts. Click [Next] to continue the installation
process.
3. On the [License Agreement] screen, move the scroll bar
on the right to the bottom, select [I accept and agree to
be bound by all the terms and conditions of this License
Agreement], and click [Next] to continue the installation
process.
Select [I accept and agree to be bound by all the terms
and conditions of this License Agreement].
4. On the [Select Installation Type] screen, select [ALL] and
click [Next] to continue the installation process.
® ®
95. For Windows 98,
- 4 -
Select
[ALL].
5. When the installation is fi nished, click [Finish] and reboot
the PC. (A shortcut to DLP Composer (TM) Lite is created
on the desktop.)
Click [Finish].