Removal Of The Speaker; Removal Of The Dip Fir Pcb Assy - Mitsubishi Electric SD206U Service Manual

7. Removal of the speaker

1. Remove the front cover and back cover following "1.
Removal of the front cover and back cover".
2. Remove the top cover following "2. Removal of the
top cover".
3. Remove the two screws (a) as shown in Fig. 2-7.
4. Remove the speaker as shown in Fig. 2-7.

8. Removal of the DIP FIR PCB ASSY

1. Remove the front cover and back cover following "1.
Removal of the front cover and back cover".
2. Remove the top cover following "2. Removal of the
top cover".
3. Remove the MAIN PCB ASSY following "3. Removal
of the MAIN PCB ASSY and motor fan (exhaust)".
4. Remove the ballast board following "4. Removal of
the lamp power unit".
5. Remove the optical unit following "5. Removal of the
optical unit".
6. Remove the screw (a) as shown in Fig. 2-8.
7. Remove the DIP FIR PCB ASSY as shown in Fig.
2-8.
- 13 -
(a)
Speaker
Fig. 2-7
(a) DIP FIR PCB
ASSY
Fast foot
Fig. 2-8